Call Us at

+91-9820143488

Email Us at

[email protected]

Three Phase DC- AC Panel Mount Solid State Relay (Input 3-32VDC Output 24-480 VAC rms) SSR 25A | (S3PDJ-4-25)

Three Phase DC- AC Panel Mount Solid State Relay (Input 3-32VDC Output 24-480 VAC rms) SSR 25A | (S3PDJ-4-25) is DC to AC SSR- model no (S3PDJ-4-25) having input of 4-32VDC and output of 80-480 VAC. It switches three phase motors, heaters or transformer loads.

Solid State Relay Three Phase DC- AC Panel Mount SSR 25A with Casing A delivers SCR Output for heavy industrial loads. It is provided with Direct Copper Bonding substrates that are used for rating above 50 Amps. This solid state relay is also available in Load voltage 600 VAC models.

Solid State Relay Three Phase DC- AC Panel Mount SSR 25A with Casing A is an eight-terminal electronic device that utilizes a DC signal to control three phase AC load. The frequency range of this Solid State Relay is 47 – 70 Hz and Current Range with proper heat sink (IT) is 25A.  It is a direct switching of a three-phase load with a single input, and can control the initial and closing down of a high-power load with a minor signal of numerous milliamps.

Satronix (India) Private Limited (estd in 1985 at Mumbai (Maharashtra, India), is a prime manufacturers of Three Phase DC- AC Panel Mount Solid State Relay (Input 3-32VDC Output 24-480 VAC rms) SSR 25A | (S3PDJ-4-25) in India. Our ultra-modern infrastructural set up helps in providing a high quality range of products. The infrastructure division is further separated into several units like manufacturing, procurement, quality control, sales and marketing, R & D, warehouse and logistics. Highly qualified team of professionals carry out all the business development in a hassle-free manner.

Specifications

Model Name / No. (S3PDJ-4-25)
Brand Satronix
A Rating 25A
Input 4-32VDC
Output 80-480 VAC
Control Voltage 4 – 32 VDC
Input Resistance Current regulator
Current Range with proper heat sink(IT) 25A
Surge Current non-repetitive t = 10msecs (ITEMS) 250 A
260 A
Voltage Range (VRMS) 25 – 480 VACrm
Off-state leakage current @ voltage – (IDRM) <10 mA
Holding current (IH) 150mA
Dv/Dt @Voltage (out) 500 V/ µs
I2T Fusing I2t (10 ms) 1000 A²S
Frequency Range 47 – 70 Hz
Weight Approx. 300 g
Junction Temperature 100 °C

Solid state relay Advantages

  • Three Phase DC- AC Panel Mount Solid State Relay (Input 3-32VDC Output 24-480 VAC rms) SSR 25A | (S3PDJ-4-25) is functionally designed for harsh environments with weathering, humidity or light-proof/explosion-proof necessities and frequent turn-on/off requirements.
  • This solid state relay has no physical contacts.
  • Solid State Relay Three Phase DC- AC Panel Mount SSR 25A Switch off at 0 AC load current which stops any arch or electrical noise.
  • Switching time is much quicker than EMR (Electromechanical relay) relay.
  • Solid State Relay Three Phase DC- AC Panel Mount SSR 25A does not have the issue of contacts spark & wear out.
  • The lifespan of a solid state relay is longer than EMR relays.
  • Solid State Relay Three Phase DC- AC Panel Mount SSR 25A is effortlessly controlled by logic circuits(microcontrollers).
  • Movements or vibrations do not distress its operation.
  • Solid State Relay Three Phase DC- AC Panel Mount SSR 25A has very low power consumption as compared to EMR relay.

Features

  • Three Phase DC- AC Panel Mount Solid State Relay (Input 3-32VDC Output 24-480 VAC rms) SSR 25A | (S3PDJ-4-25) provides Faster switching response and High Dielectric Strength.
  • Chassis mount.
  • Solid State Relay Three Phase DC- AC Panel Mount SSR 25A with Casing A requires least actuation power.
  • Optically isolated.
  • Solid State Relay Three Phase DC- AC Panel Mount SSR 25A with Casing A, have Zero Voltage Turn-On and Zero Current Turn-off.
  • No noise feedback from output to input circuits.
  • No noise due to load current switching at immediate zero.
  • Solid State Relay Three Phase DC- AC Panel Mount SSR 25A with Casing A consists of a Built-in snubber circuit and Input LED Indication.

Applications

  • Three Phase DC- AC Panel Mount Solid State Relay (Input 3-32VDC Output 24-480 VAC rms) SSR 25A | (S3PDJ-4-25) are used in many machineries like Medical Equipment, Printing Machinery, Liquid and Solid Packaging Equipment, Extrusion Machinery and Pharma / Packaging Machinery etc.
  • Hot Runner Systems in the Plastic Industry.
  • Interchanging of Heater by Temperature Controller.
  • Solid State Relay Three Phase DC- AC Panel Mount SSR 25A with Casing A is used in Oven/Furnace industry for Heater applications.
  • Injection Moulding, Plastic Processing Machinery, Blow Moulding and Extruder.
  • Solder Wave / Reflow Machine, Solder Screen Printers.
  • Controlling of Electromagnetic Heaters (Inductive Heaters) by Analog SSRs.

Satronix Dealer locations

Satronix Dealers for Three Phase DC- AC Panel Mount Solid State Relay (Input 3-32VDC Output 24-480 VAC rms) SSR 25A | (S3PDJ-4-25) at these locations across India: –

Lamington Road (Mumbai) Ulhasnagar (Mumbai) Lohar Chawl (Mumbai) Kolhapur (Maharashtra) Bangalore (Karnataka)
Mazagaon (Mumbai) Aurangabad (Maharashtra) Pune (Maharashtra) Ahmednagar (Maharashtra) Solan (Himachal Pradesh)
Vapi (Gujrat) Rajkot (Gujrat) Kolkata (West Bengal) Chennai (Tamil Nadu)

 

Search For Tags:relay, solid state relay